National Instruments PXI-5124 Oscilloscope

The National Instruments PXI-5124 (Part Numbers: 778757-01, 778757-02, 778757-03 778757-04, 191766A-02, 191766C-01, and 191766A-01) high-resolution digitizer has various configurations, including: 8 MB/channel Oscilloscope (Part Number: 778757-01), 32 MB/channel Oscilloscope (Part Number: 778757-02), 256 MB/channel Oscilloscope (Part Number: 778757-03), 512 MB/channel Oscilloscope (Part Number: 778757-04).

This oscilloscope highlights two 200 MS/s simultaneous tested data source channels with 2 input channels, 12-bit analog resolution, 150 MHz data transmission, and up to 512 MB of memory for each route in a smaller 3U PXI module. The NI PXI-5124 uses the rapid PCI bus and the scatter-gather bus mastering of the NI MITE ASIC to move information to the PC at speeds up to 100 times speedier than customary instrument interfaces. This helps drastically diminish general test time. With the Synchronization and Memory Core (SMC) design of the PXI-5124, the user can make mixed signal frameworks utilizing signal generators and advanced waveform generator/analyzers or manufacture a high-channel-count digitizer with sub-nanosecond synchronization between channels.

To accomplish inspecting rates different than 200 MS/s when utilizing the inner sample clock, the NI PXI-5124 crushes the examined information. When the user sets an inspecting rate of 50 MS/s, the NI PXI-5124 just stores one out of each four samples it gets from the ADCs to locally available memory. The NI PXI-5124 can test at rates of 200/n MS/s, where n is a whole number an incentive in the vicinity of 1 and 216 – 1. Since this model does not change the recurrence of the clock sent to the ADCs, it makes a sample clock for send out considering the successful examining rate that the user has arranged. The device has a warm-up time of 15 minutes before operation.Also, it has an external calibration interval of 2 years.

The PXI-5124 operates using the NI-SCOPE 2.7 driver software which provides features such as programming interfaces, documentation, and examples for Application Development Environments such as LabVIEW, LabWindows™/CVI™, Measurement Studio, Microsoft Visual C/C++, .NET (C# and VB.NET).The device has 3 BNC female connectors, 2 SMB Jack connectors, and a 9-pin mini-circular DIN connectors.

Apex Waves will continue to Buy, Sell, and Repair EOL NI Hardware in perpetuity. While the PXI-5124 entered the NI Maintenance phase on December 30, 2022, it will remain available with Apex Waves. Request your quote today!