SCC-FT01
Modular Systems > National Instruments > SCC
| Description: | SCC-FT01, 2 SE/1 DI Channels, Feedthrough Module |
Need an Official Quote?
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
National Instruments SCC-FT01 Feedthrough Module
The National Instruments SCC-FT01 (Part Number: 777459-01) is a Feedthrough Module that interfaces straightforwardly to the analog input (AI) and analog output (AO) channels of a data acquisition (DAQ) device in the E Series. The breadboard region of the NI SCC-FT01 can be used to create unique signal molding hardware that can associate with and condition any of the analog, digital (P0.), and general-purpose counter/clock (CTR) channels of the E Series DAQ gadgets. To utilize the SCC-FT01 Feedthrough Module for CTR capacities, the user can utilize the pads above connector J2 labeled CTR for associations with the breadboard region. A NI SCC-FT01 signal association label, which defines the pad numbers on the SCC-FT01 Feedthrough Module, is connected to the inside of the enclosure of the SCC module. Regardless of whether the user connects the NI SCC-FT01 to a SCC attachment for AI, AO, computerized, or counter molding, the pads recorded under the “all” segment are associated and can be employed. The device has 2 single-ended or 1 differential analog input channel, and 1 analog output channel when plugged into an AO socket on the SC-2345. It is equipped with a 20-pin right-angle male connector and a 6-pin screw terminal system–with the screw terminal having a dimension of 28 to 16 AWG.
The user has the option to link the SCC-FT01 to the CTR CH0 attachment J19. In addition, when the National Instruments SCC-FT01 Feedthrough Module is connected to the CTR CH1 attachment J20, the pads under CTR CH1 on the board connect with signals related with CTR channel 1 and AI of the E Series DAQ gadget. The user can also access cascading signals from nearby SCC modules.
The SCC-FT01 is run using the NI-DAQmx, traditional NI-DAQ, NI-VISA driver software which are compatible with software packages/application development environments (ADEs) such as LabVIEW, LabVIEW Real-Time module, LabWindows/CVI, Visual C++, Visual Basic, or Measurement Studio. The device hardware can be configured using the Measurement & Automation Explorer (MAX) tool. The NI device measures 3.5 x 1.15 x 0.73 in. in physical dimensions.
SCC-FT01 Obsolete Status has been announced by National Instruments, but the module will still be available for purchase and repairs by Apex Waves.
| Model | SCC-FT01, 777459-01 |
|---|---|
| Manufacturer | National Instruments |
| Series | SCC |
| Type | Feedthrough Module |
| Channels | 2 SE/1 DI |
| Accessible Power | 5 and ±15 VDC |
| Dimensions | 3.5 x 1.2 x 0.7 in. |
| Warranty | Three Year Warranty |
| SCC-FT01 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments SCC-FT01 Frequently Asked Questions
Question: What is the maximum amplitude of input voltage for the NI SCC-FT01?
Answer: The maximum amplitude of input voltage that the NI SCC-FT01 can use is dependent on the DAQ board.
Question: Can you use the SCC-FT01 to develop custom circuitry?
Answer: Yes, you can use the breadboard area of the SCC-FT01 to develop custom signal-conditioning circuitry, allowing you to connect to analog, digital, and general-purpose counter/timer channels of E Series DAQ devices.
Question: Can you plug the National Instruments SCC-FT01 into the SC-2345?
Answer: Yes, you can plug the National Instruments SCC-FT01 into an AI or AO socket on the SC-2345.
SCC-FT01 PDF Manuals
ARCHIVED LABVIEW DATA ACQUISITION BASICS MANUAL.PDF
SC 2345 2350 CARRIER USER MANUAL AND SPECIFICATIONS.PDF
SCC 68 USER GUIDE AND SPECIFICATIONS.PDF
SCC-FT01 FEEDTHROUGH MODULE USER GUIDE AND SPECIFICATIONS.PDF
Why Buy From Apex Waves:
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
SCC-FT01
Modular Systems > National Instruments > SCC
SCC-FT01, 2 SE/1 DI Channels, Feedthrough Module
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments SCC-FT01 Feedthrough Module
The National Instruments SCC-FT01 (Part Number: 777459-01) is a Feedthrough Module that interfaces straightforwardly to the analog input (AI) and analog output (AO) channels of a data acquisition (DAQ) device in the E Series. The breadboard region of the NI SCC-FT01 can be used to create unique signal molding hardware that can associate with and condition any of the analog, digital (P0.), and general-purpose counter/clock (CTR) channels of the E Series DAQ gadgets. To utilize the SCC-FT01 Feedthrough Module for CTR capacities, the user can utilize the pads above connector J2 labeled CTR for associations with the breadboard region. A NI SCC-FT01 signal association label, which defines the pad numbers on the SCC-FT01 Feedthrough Module, is connected to the inside of the enclosure of the SCC module. Regardless of whether the user connects the NI SCC-FT01 to a SCC attachment for AI, AO, computerized, or counter molding, the pads recorded under the “all” segment are associated and can be employed. The device has 2 single-ended or 1 differential analog input channel, and 1 analog output channel when plugged into an AO socket on the SC-2345. It is equipped with a 20-pin right-angle male connector and a 6-pin screw terminal system–with the screw terminal having a dimension of 28 to 16 AWG.
The user has the option to link the SCC-FT01 to the CTR CH0 attachment J19. In addition, when the National Instruments SCC-FT01 Feedthrough Module is connected to the CTR CH1 attachment J20, the pads under CTR CH1 on the board connect with signals related with CTR channel 1 and AI of the E Series DAQ gadget. The user can also access cascading signals from nearby SCC modules.
The SCC-FT01 is run using the NI-DAQmx, traditional NI-DAQ, NI-VISA driver software which are compatible with software packages/application development environments (ADEs) such as LabVIEW, LabVIEW Real-Time module, LabWindows/CVI, Visual C++, Visual Basic, or Measurement Studio. The device hardware can be configured using the Measurement & Automation Explorer (MAX) tool. The NI device measures 3.5 x 1.15 x 0.73 in. in physical dimensions.
SCC-FT01 Obsolete Status has been announced by National Instruments, but the module will still be available for purchase and repairs by Apex Waves.
| Model | SCC-FT01, 777459-01 |
|---|---|
| Manufacturer | National Instruments |
| Series | SCC |
| Type | Feedthrough Module |
| Channels | 2 SE/1 DI |
| Accessible Power | 5 and ±15 VDC |
| Dimensions | 3.5 x 1.2 x 0.7 in. |
| Warranty | Three Year Warranty |
| SCC-FT01 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments SCC-FT01 Frequently Asked Questions
Question: What is the maximum amplitude of input voltage for the NI SCC-FT01?
Answer: The maximum amplitude of input voltage that the NI SCC-FT01 can use is dependent on the DAQ board.
Question: Can you use the SCC-FT01 to develop custom circuitry?
Answer: Yes, you can use the breadboard area of the SCC-FT01 to develop custom signal-conditioning circuitry, allowing you to connect to analog, digital, and general-purpose counter/timer channels of E Series DAQ devices.
Question: Can you plug the National Instruments SCC-FT01 into the SC-2345?
Answer: Yes, you can plug the National Instruments SCC-FT01 into an AI or AO socket on the SC-2345.
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
