National Instruments 786162-01 Backshell Connector Kit

Part Number 786162-01 is the identifying part number for the National Instruments  NI-9972 Backshell Connector Kit. The backshell connector is designed to work with devices with 6-position connectors. This accessory's major function is to protect the operator from electric shocks and hazards during device operation by acting as a barrier between the operator and conductors carrying high-voltage signals. 

The 786162-01 is built with a special type of plastic that has powerful insulation to be used in systems that have HV signal flow. The package comes with four backshell units and is a suitable solution for customized cables. On the other hand, this kit can be used to cover the conductive part of 6-position connectors during test, monitoring, and control applications. Note that the kit also supports strain relief functionality. 

The use of 786162-01 in devices such as the NI 9219 Analog Input Module is one of the safety methods for protecting the operator from hazardous voltages. Similarly, there are also other safety measures that the user must take when operating these devices. First, hazardous voltage wiring should only be done by qualified personnel with knowledge of local electrical standards. Second, hazardous voltage circuits and human-accessible circuits should not mixed on the same module. Likewise, you must follow the standard guidelines mentioned in the official documentation. Also, when using the NI-9219, note that the maximum voltage allowed between channel-to-channel as well as channel-to-ground is 250 Vrms, falling under Measurement Category II. Furthermore, you must also make sure there is a suitable ambient environment, which means proper temperature, levels of humidity, altitude, and pollution levels.