AT-AO-10 Request for Availability

National Instruments AT-AO-10 Analog Output Board

The AT-AO-10 board is an Analog Output Board produced by National Instruments. The AT-AO-10 comes with the part numbers 776542-01 and 181435-10. The legacy NI-DAQ driver software can be used with the board. The NI AT-AO-10 can be run by software such as LabVIEW, VirtualBench, ComponentWorks, BridgeVIEW, LabWindows/CVI, and Measure. The AT-AO-10 can be operated and used on Windows NT/98/95 operating systems.

This Analog Output Board can produce high performance with analog outputs. This board is manufactured for ISA computers. The NI AT-AO-10 is built with 10 output channels; each of can be bipolar or unipolar. There is additionally an 8-bit digital I/O port which delivers further control. The channels can sink 4 mA to 20 mA current when linked to an external source. The NI AT-AO-10 board is equipped with properties similar to the AT-AO-6 board, except for the output channel count. The AT-AO-10 has a maximum update rate of 300 kS/s.  

The NI AT-AO-10 can shift waveforms into the double-buffered shape of DAC channel pairs. This Analog Output Board comes with DC output coupling. There are 1024 samples in the FIFO buffer. The maximum load impedance required for the AT-AO-10 is 500 pF. This board contains a 50-pin male I/O connector. There are eight digital TTL lines available on the AT-AO-10 board with 5V. A slave interface bus is used in the Analog Output Board. RTSI lines, along with 7 triggering functions, are linked with the NI AT-AO-10 board.

AT-AO-10 Obsolete Status has been announced by National Instruments, but the analog output board will still be available for purchase and repairs by Apex Waves.