National Instruments 782457-01 CompactRIO Chassis

Part Number 782457-01 is the identifying part number for the National Instruments NI-9154 CompactRIO Chassis. The 782457-01 is an 8-slot chassis that ships with an integrated MXI-Express that has a maximum cable length of 7 m. Likewise, it comes with a Virtex-5 LX50 FPGA that has 28800 flip flops and 28800 6-input LUTs. Similarly, it has 48 DSP48 slices and a block RAM of size 1728 kbits. Furthermore, it has timebases of frequencies 40, 80, 120, 160, or 200 MHz and the accuracy is ±100 ppm (maximum).

The screw terminal wiring on the 782457-01 supports copper wires of thickness ranging from 24 AWG to 14 AWG. Likewise, the recommended wire strip length is 6 mm while the temperature rating is 85 °C. Similarly, the torque for the screw terminals must be between 0.20 Nm to 0.25 Nm.Furthermore, screw flanges are provided for connector securement and the torque for screw flanges is between 0.3 Nm to 0.4 Nm. The 782457-01 supports input voltages from 9 VDC to 30 VDC and the maximum power input can be 30 W. With no I/O modules, the chassis consumes a maximum power of 12 W while this can reach 20.5 W when 8 I/O modules are used. However, since these values are true for LabVIEW FPGA applications compiled at 80 MHz and can differ according to the user’s application. 
        
The 782457-01 is recommended for operation between temperatures of 0 °C to 55 °C at a relative humidity of 10% to 90%. Likewise, it is designed for indoor use only and should be operated within a maximum altitude of 2000 m. On the other hand, it can be stored between -40 °C to  85°C at a relative humidity of 5% to 95%. The maximum voltage allowed between the V to C terminal in the 782457-01 is 30 VDC under Measurement Category I. The module is designed to meet the requirements of some of the following safety standards: EC 61010-1, EN 61010-1 UL 61010-1, CSA C22.2 No.61010-1, EN 60079-0, EN 60079-7, IEC 60079-0, IEC 60079-7, UL 60079-0, UL 60079-7, CSA C22.2 No. 60079-0, CSA C22.2 No. 60079-7.