Modular Systems > National Instruments > FieldDAQ
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
785639-01 Request for Availablility
785639-01, 8 Channels, 24 Bits, FD-11603 Voltage Input Device
Need an Official Quote?
National Instruments 785639-01 Voltage Input Device for FieldDAQ
Part Number 785639-01 identifies the National Instruments FD-11603 Voltage Input Device for FieldDAQ. The 785639-01 features 8 analog input channels with galvanic isolation between the channels and the chassis. Likewise, the device has a Delta-sigma ADC with a resolution of 24 bits and analog prefiltering. The input channels support a voltage range of ±10.5 V. The timebase frequency can be configured to 13.1072 MHz, 12.8 MHz, 12.288 MHz, and 10.24 MHz, with an accuracy of ±30 ppm maximum. The sample rate ranges from a minimum of 500 samples/s to a maximum of 102.4 kSamples/s.
This 785639-01 supports TCP/IP and UDP protocols, using a variety of network ports: HTTP:80 (configuration only), TCP:3580; UDP:5353 (configuration only), TCP:5353 (configuration only); TCP:31415; UDP:7865 (configuration only), and UDP:8473 (configuration only). It has a default MTU size of 1500 bytes. Additionally, it has two internally-switched 8-pin X-coded M12 ports for Ethernet communication. The communication rates are auto-negotiated between 10/100/1000 Mbps. The maximum cabling distance is 100 meters per segment, with a maximum of 15 hops per line. Furthermore, it uses IEEE 802.1AS protocol for network synchronization over 1000 Base-TX interface.
The 785639-01 supports an input voltage range of 9 VDC to 30 VDC, with a maximum power consumption of 7.5 W. Both power input and output use a 5-pin L-coded male M12 connector. The recommended torque for M12 connectors is 0.6 Nm. The maximum current for the Power IN/OUT terminals is 10 A, and a 16 A slow blow fuse is suggested for external overcurrent protection.
In terms of physical dimensions, the 785639-01 measures 7.8 in. × 3.0 in. × 1.9 in. and weighs 1.2 kg. It has a recommended calibration interval of 1 year. The device is designed to operate between -40 °C to 85 °C with relative humidity up to 100%. It can be stored in temperatures ranging from -40 °C to 100 °C. It is designed for operation at altitudes up to 5000 meters.
| Part Number | 785639-01 |
|---|---|
| Model Name | FD-11603 |
| Part Type | Voltage Input Device for FieldDAQ |
| Number of Analog Input Channels | 8 |
| ADC Resolution | 24 bits |
| Analog Input Voltage Range | ±10.5 V |
| Timebase Frequency | 13.1072 MHz, 12.8 MHz, 12.288 MHz, and 10.24 MHz |
| Sample Rate | 500 samples/s to 102.4 kSamples/s |
| Maximum Device Power Consumption | 7.5 W |
| Device Input Voltage Range | 9 VDC to 30 VDC |
785639-01 PDF Manuals
FD 11603 CALIBRATION PROCEDURE.PDF
FD 11603 LETTER OF VOLATILITY.PDF
FD 11603 SAFETY ENVIRONMENTAL AND REGULATORY INFORMATION.PDF
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
785639-01
Modular Systems > National Instruments > FieldDAQ
785639-01, 8 Channels, 24 Bits, FD-11603 Voltage Input Device
1-800-915-6216
- Description
- Technical Specifications
- Manuals & PDFs
National Instruments 785639-01 Voltage Input Device for FieldDAQ
Part Number 785639-01 identifies the National Instruments FD-11603 Voltage Input Device for FieldDAQ. The 785639-01 features 8 analog input channels with galvanic isolation between the channels and the chassis. Likewise, the device has a Delta-sigma ADC with a resolution of 24 bits and analog prefiltering. The input channels support a voltage range of ±10.5 V. The timebase frequency can be configured to 13.1072 MHz, 12.8 MHz, 12.288 MHz, and 10.24 MHz, with an accuracy of ±30 ppm maximum. The sample rate ranges from a minimum of 500 samples/s to a maximum of 102.4 kSamples/s.
This 785639-01 supports TCP/IP and UDP protocols, using a variety of network ports: HTTP:80 (configuration only), TCP:3580; UDP:5353 (configuration only), TCP:5353 (configuration only); TCP:31415; UDP:7865 (configuration only), and UDP:8473 (configuration only). It has a default MTU size of 1500 bytes. Additionally, it has two internally-switched 8-pin X-coded M12 ports for Ethernet communication. The communication rates are auto-negotiated between 10/100/1000 Mbps. The maximum cabling distance is 100 meters per segment, with a maximum of 15 hops per line. Furthermore, it uses IEEE 802.1AS protocol for network synchronization over 1000 Base-TX interface.
The 785639-01 supports an input voltage range of 9 VDC to 30 VDC, with a maximum power consumption of 7.5 W. Both power input and output use a 5-pin L-coded male M12 connector. The recommended torque for M12 connectors is 0.6 Nm. The maximum current for the Power IN/OUT terminals is 10 A, and a 16 A slow blow fuse is suggested for external overcurrent protection.
In terms of physical dimensions, the 785639-01 measures 7.8 in. × 3.0 in. × 1.9 in. and weighs 1.2 kg. It has a recommended calibration interval of 1 year. The device is designed to operate between -40 °C to 85 °C with relative humidity up to 100%. It can be stored in temperatures ranging from -40 °C to 100 °C. It is designed for operation at altitudes up to 5000 meters.
| Part Number | 785639-01 |
|---|---|
| Model Name | FD-11603 |
| Part Type | Voltage Input Device for FieldDAQ |
| Number of Analog Input Channels | 8 |
| ADC Resolution | 24 bits |
| Analog Input Voltage Range | ±10.5 V |
| Timebase Frequency | 13.1072 MHz, 12.8 MHz, 12.288 MHz, and 10.24 MHz |
| Sample Rate | 500 samples/s to 102.4 kSamples/s |
| Maximum Device Power Consumption | 7.5 W |
| Device Input Voltage Range | 9 VDC to 30 VDC |
785639-01 PDF Manuals & Diagrams
785639-01 PDF Manuals
FD 11603 CALIBRATION PROCEDURE.PDF
FD 11603 LETTER OF VOLATILITY.PDF
FD 11603 SAFETY ENVIRONMENTAL AND REGULATORY INFORMATION.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
