Modular Systems > National Instruments > FlexRIO




Or speak to a sales representative for additional information:
783763-01 Request for Availablility
783763-01, NI Linux Real-Time , 512 MB, DDR3, NI-7931 Controller for FlexRIO
Need an Official Quote?
National Instruments 783763-01 Controller for FlexRIO
Part Number 783763-01 is the identifying part number for the National Instruments NI-7931 Controller for FlexRIO. The 783763-01 ships with a Xilinx Zynq-7020, XC7Z020 All Programmable SoC which features an ARM Cortex-A9-based dual-core processor with a speed of 667 MHz. Likewise, it features 512 MB of DDR3 RAM and 512 MB of nonvolatile memory, based on SLC NAND flash. The real-time clock accuracy is 5 ppm while the flash reboot endurance is 100000 cycles. The device comes with the NI Linux Real-Time (32-bit) operating system. Furthermore, the CMOS battery on the device has a battery life of 10 years with power applied to the power connector or in storage up to 70 °C.
The internal reference clock on the 783763-01 has a VCXO-type oscillator with a frequency of 100 MHz. Likewise, it has a single Ethernet port that is compatible with IEEE 802.3 and supports the 10Base-T, 100Base-TX, and 1000Base-T Ethernet interfaces. The communication rates are auto-negotiated between 10 Mbps, 100 Mbps, and 1000 Mbps and run in both full and half-duplex mode. The maximum cabling distance is 100 m per segment. Furthermore, there is a single USB device and host port using the USB 2.0 Hi-Speed interface that has a maximum data rate of 480 Mb per port. Moreover, the SD card slot supports SD and SDHC standards and memory sizes up to 32 GB.
The 783763-01 also features a Kintex-7 XC7K325T reconfigurable FPGA that has 203800 LUTs, 840 DSP48 slices, and an embedded block RAM of 16020 kbits. The default timebase is 40 MHz while the timebase accuracy is ±100 ppm. There are 16 DMA channels and data transfers take place through DMA, interrupts, and programmed I/O. 136 general-purpose channels in the FPGA digital I/O can be configured as 136 single-ended, 68 differential channels, or a combination of both. This controller supports an input voltage of 9 V to 30 V and consumes a maximum power of 60 W. The recommended power supply for the device is >75 W, 12 VDC. The device measures 9.21 in. × 5.14 in. × 1.73 in. in physical dimensions and weighs 1170 g.
Part Number | 783763-01 |
---|---|
Model Name | NI-7931 |
Part Type | Controller for FlexRIO |
Processor | Xilinx Zynq-7020, XC7Z020 All Programmable SoC, CLG484 |
DRAM | 512 MB, DDR3 |
Nonvolatile Memory | 512 MB, SLC NAND Flash |
Number of Network Ports | 1 |
USB Ports | 1 USB Device and 1 USB Port |
FPGA | Kintex-7 XC7K325T |
Operating System | NI Linux Real-Time (32-bit) |
Why Buy From Apex Waves:
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
783763-01
Modular Systems > National Instruments > FlexRIO
783763-01, NI Linux Real-Time , 512 MB, DDR3, NI-7931 Controller for FlexRIO
1-800-915-6216
- Description
- Technical Specifications
- Manuals & PDFs
National Instruments 783763-01 Controller for FlexRIO
Part Number 783763-01 is the identifying part number for the National Instruments NI-7931 Controller for FlexRIO. The 783763-01 ships with a Xilinx Zynq-7020, XC7Z020 All Programmable SoC which features an ARM Cortex-A9-based dual-core processor with a speed of 667 MHz. Likewise, it features 512 MB of DDR3 RAM and 512 MB of nonvolatile memory, based on SLC NAND flash. The real-time clock accuracy is 5 ppm while the flash reboot endurance is 100000 cycles. The device comes with the NI Linux Real-Time (32-bit) operating system. Furthermore, the CMOS battery on the device has a battery life of 10 years with power applied to the power connector or in storage up to 70 °C.
The internal reference clock on the 783763-01 has a VCXO-type oscillator with a frequency of 100 MHz. Likewise, it has a single Ethernet port that is compatible with IEEE 802.3 and supports the 10Base-T, 100Base-TX, and 1000Base-T Ethernet interfaces. The communication rates are auto-negotiated between 10 Mbps, 100 Mbps, and 1000 Mbps and run in both full and half-duplex mode. The maximum cabling distance is 100 m per segment. Furthermore, there is a single USB device and host port using the USB 2.0 Hi-Speed interface that has a maximum data rate of 480 Mb per port. Moreover, the SD card slot supports SD and SDHC standards and memory sizes up to 32 GB.
The 783763-01 also features a Kintex-7 XC7K325T reconfigurable FPGA that has 203800 LUTs, 840 DSP48 slices, and an embedded block RAM of 16020 kbits. The default timebase is 40 MHz while the timebase accuracy is ±100 ppm. There are 16 DMA channels and data transfers take place through DMA, interrupts, and programmed I/O. 136 general-purpose channels in the FPGA digital I/O can be configured as 136 single-ended, 68 differential channels, or a combination of both. This controller supports an input voltage of 9 V to 30 V and consumes a maximum power of 60 W. The recommended power supply for the device is >75 W, 12 VDC. The device measures 9.21 in. × 5.14 in. × 1.73 in. in physical dimensions and weighs 1170 g.
Part Number | 783763-01 |
---|---|
Model Name | NI-7931 |
Part Type | Controller for FlexRIO |
Processor | Xilinx Zynq-7020, XC7Z020 All Programmable SoC, CLG484 |
DRAM | 512 MB, DDR3 |
Nonvolatile Memory | 512 MB, SLC NAND Flash |
Number of Network Ports | 1 |
USB Ports | 1 USB Device and 1 USB Port |
FPGA | Kintex-7 XC7K325T |
Operating System | NI Linux Real-Time (32-bit) |
783763-01 PDF Manuals & Diagrams
783763-01 PDF Manuals
NI 7935R GETTING STARTED GUIDE.PDF
NI 793X LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."