Modular Systems > National Instruments > FlexRIO
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
783766-01 Request for Availablility
783766-01, 512 MB, DDR3, 1 Port, NI-7935 Controller for FlexRIO
Need an Official Quote?
National Instruments 783766-01 Controller for FlexRIO
Part Number 783766-01 is the identifying part number for the National Instruments NI-7935 Controller for FlexRIO. The 783766-01 ships with a Xilinx Zynq-7020, XC7Z020 All Programmable SoC which features an ARM Cortex-A9-based dual-core processor with a speed of 667 MHz. Likewise, it features 512 MB of DDR3 RAM and 512 MB of nonvolatile memory, based on SLC NAND flash. The real-time clock accuracy is 5 ppm while the flash reboot endurance is 100000 cycles. The device comes with the NI Linux Real-Time (32-bit) operating system. Furthermore, the CMOS battery on the device has a battery life of 10 years with power applied to the power connector or in storage up to 70 °C.
The internal reference clock on the 783766-01 has a VCXO-type oscillator with a frequency of 100 MHz. Likewise, it has a single Ethernet port that is compatible with IEEE 802.3 and supports the 10Base-T, 100Base-TX, and 1000Base-T Ethernet interfaces. Furthermore, there is a single USB device and host port using the USB 2.0 Hi-Speed interface that has a maximum data rate of 480 Mb per port. The SD card slot supports SD and SDHC standards and memory sizes up to 32 GB.
Moreover, there are high-speed serial ports having 2 RX and TX channels that support data rates of 10.3125 Gbps, 6.25 Gbps, and 3.125 Gbps. The 783766-01 also features a Kintex-7 XC7K410T reconfigurable FPGA that has 254200 LUTs, 1540 DSP48 slices, and an embedded block RAM of 28620 kbits. The default timebase is 40 MHz while the timebase accuracy is ±100 ppm. There are 16 DMA channels and data transfers take place through DMA, interrupts, and programmed I/O. 136 general-purpose channels in the FPGA digital I/O can be configured as 136 single-ended, 68 differential channels, or a combination of both.
The 783766-01 supports an input voltage of 9 V to 30 V and consumes a maximum power of 60 W. The recommended power supply for the device is >75 W, 12 VDC. The device measures 9.21 in. × 5.14 in. × 1.73 in. in physical dimensions and weighs 1170 g.
| Part Number | 783766-01 |
|---|---|
| Model Name | NI-7935 |
| Part Type | Controller for FlexRIO |
| Processor | "Xilinx Zynq-7020, XC7Z020 All Programmable SoC, CLG484" |
| DRAM | 512 MB, DDR3 |
| Nonvolatile Memory | 512 MB, SLC NAND Flash |
| Number of Network Ports | 1 |
| Serial Port Speeds | 10.3125 Gbps, 6.25 Gbps, 3.125 Gbps |
| FPGA | Kintex-7 XC7K410T |
| Operating System | NI Linux Real-Time (32-bit) |
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
783766-01
Modular Systems > National Instruments > FlexRIO
783766-01, 512 MB, DDR3, 1 Port, NI-7935 Controller for FlexRIO
1-800-915-6216
- Description
- Technical Specifications
National Instruments 783766-01 Controller for FlexRIO
Part Number 783766-01 is the identifying part number for the National Instruments NI-7935 Controller for FlexRIO. The 783766-01 ships with a Xilinx Zynq-7020, XC7Z020 All Programmable SoC which features an ARM Cortex-A9-based dual-core processor with a speed of 667 MHz. Likewise, it features 512 MB of DDR3 RAM and 512 MB of nonvolatile memory, based on SLC NAND flash. The real-time clock accuracy is 5 ppm while the flash reboot endurance is 100000 cycles. The device comes with the NI Linux Real-Time (32-bit) operating system. Furthermore, the CMOS battery on the device has a battery life of 10 years with power applied to the power connector or in storage up to 70 °C.
The internal reference clock on the 783766-01 has a VCXO-type oscillator with a frequency of 100 MHz. Likewise, it has a single Ethernet port that is compatible with IEEE 802.3 and supports the 10Base-T, 100Base-TX, and 1000Base-T Ethernet interfaces. Furthermore, there is a single USB device and host port using the USB 2.0 Hi-Speed interface that has a maximum data rate of 480 Mb per port. The SD card slot supports SD and SDHC standards and memory sizes up to 32 GB.
Moreover, there are high-speed serial ports having 2 RX and TX channels that support data rates of 10.3125 Gbps, 6.25 Gbps, and 3.125 Gbps. The 783766-01 also features a Kintex-7 XC7K410T reconfigurable FPGA that has 254200 LUTs, 1540 DSP48 slices, and an embedded block RAM of 28620 kbits. The default timebase is 40 MHz while the timebase accuracy is ±100 ppm. There are 16 DMA channels and data transfers take place through DMA, interrupts, and programmed I/O. 136 general-purpose channels in the FPGA digital I/O can be configured as 136 single-ended, 68 differential channels, or a combination of both.
The 783766-01 supports an input voltage of 9 V to 30 V and consumes a maximum power of 60 W. The recommended power supply for the device is >75 W, 12 VDC. The device measures 9.21 in. × 5.14 in. × 1.73 in. in physical dimensions and weighs 1170 g.
| Part Number | 783766-01 |
|---|---|
| Model Name | NI-7935 |
| Part Type | Controller for FlexRIO |
| Processor | "Xilinx Zynq-7020, XC7Z020 All Programmable SoC, CLG484" |
| DRAM | 512 MB, DDR3 |
| Nonvolatile Memory | 512 MB, SLC NAND Flash |
| Number of Network Ports | 1 |
| Serial Port Speeds | 10.3125 Gbps, 6.25 Gbps, 3.125 Gbps |
| FPGA | Kintex-7 XC7K410T |
| Operating System | NI Linux Real-Time (32-bit) |
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
