Modular Systems > National Instruments > Motor Drives
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
ISM-7400 Request for Availablility
ISM-7400, 30 VDC, 5 to 24 V Logic, Integrated Stepper
Need an Official Quote?
National Instruments ISM-7400 Integrated Stepper
The National Instruments ISM-7400 is an integrated stepper that is designed to enhance the efficiency and longevity of your motorized system. The NI ISM-7400 is designed to support a supply voltage range of 12 VDC to 48 VDC, providing you with versatile compatibility across various applications. Comprehensive protection features; including over-voltage, under-voltage, over-current, and over-temperature safeguards guarantee the safety and longevity of your motorized system. The stepper is made for use with NI 7330/7340/7350 motion controllers.
For optimal performance, the ISM-7400 integrated stepper should be placed on a smooth and flat metal surface. Doing so enables efficient heat dissipation that will safeguard your motor from overheating. For applications that demand enhanced cooling, it is recommended to use a fan. The ISM-7400 can be securely connected by using four M3 screws, as the mounting hole depth of 4.5 mm provides ample room for a reliable installation.
The NI ISM-7400 is available in three different configurations: the ISM-7400 (single-shaft), the ISM-7400D (dual-shaft), and the ISM-7400E (dual-shaft with a 1000-line incremental encoder).
To facilitate seamless integration into your control system, the NI ISM-7400 is optically isolated and supports 5 V to 24 V of logic. The stepper is able to acommodate sourcing, sinking, or differential signals, ensuring compatibility with a wide array of control interfaces.
In addition to a reliable power source, you will require a compatible step signal source, such as a Programmable Logic Controller (PLC) or a motion controller. These step signals provide precise control over the motor's movement, enabling seamless operation and synchronization with your application. To ensure a safe electrical connection, the NI ISM-7400 incorporates an internal fuse that connects to the positive terminal of the power supply.
The NI ISM-7400 boasts three inputs to accommodate a range of control signals:
STEP: This input allows for precise control of the motor’s rotational movement, and it can accept logic signals in a range from 5 V to 24 V.
DIR: This high-speed digital input allows for control of the motor direction with incredible accuracy.
EN: This input allows the user to have full control over the power of the motor, allowing for rapid and precise adjustments.
| Model Name | ISM-7400 |
|---|---|
| Part Type | Isolated Stepper |
| Compatible With | NI 7330/7340/7350 Motion Controllers |
| Maximum Voltage | 30 VDC |
| Input Current | 5 mA typ at 4 V, 15 mA typ at 30 V |
| Rotor Inertia | 1.16 × 10 to 3 oz · sec2 |
| Dimensions | 1.71 × 2.20 × 2.64 in |
| Weight | 14.7 oz |
| Warranty | Three Year Warranty |
| ISM-7400 Manuals | PDFs Available for Download |
National Instruments ISM-7400 Frequently Asked Questions
Question: What controllers are the ISM-7400 compatible with?
Answer: The ISM-7400 stepper is made for use with NI 7330/7340/7350 motion controllers.
Question: What is the difference between the versions of the ISM-7400 stepper?
Answer: The ISM-7400 has a single-shaft, the ISM-7400D a dual-shaft, and the ISM-7400E a dual-shaft with a 1000-line incremental encoder.
Question: What's the maximum voltage of the ISM-7400?
Answer: The ISM-7400 is designed to support a supply voltage range of 12 VDC to 48 VDC,
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
ISM-7400
Modular Systems > National Instruments > Motor Drives
ISM-7400, 30 VDC, 5 to 24 V Logic, Integrated Stepper
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments ISM-7400 Integrated Stepper
The National Instruments ISM-7400 is an integrated stepper that is designed to enhance the efficiency and longevity of your motorized system. The NI ISM-7400 is designed to support a supply voltage range of 12 VDC to 48 VDC, providing you with versatile compatibility across various applications. Comprehensive protection features; including over-voltage, under-voltage, over-current, and over-temperature safeguards guarantee the safety and longevity of your motorized system. The stepper is made for use with NI 7330/7340/7350 motion controllers.
For optimal performance, the ISM-7400 integrated stepper should be placed on a smooth and flat metal surface. Doing so enables efficient heat dissipation that will safeguard your motor from overheating. For applications that demand enhanced cooling, it is recommended to use a fan. The ISM-7400 can be securely connected by using four M3 screws, as the mounting hole depth of 4.5 mm provides ample room for a reliable installation.
The NI ISM-7400 is available in three different configurations: the ISM-7400 (single-shaft), the ISM-7400D (dual-shaft), and the ISM-7400E (dual-shaft with a 1000-line incremental encoder).
To facilitate seamless integration into your control system, the NI ISM-7400 is optically isolated and supports 5 V to 24 V of logic. The stepper is able to acommodate sourcing, sinking, or differential signals, ensuring compatibility with a wide array of control interfaces.
In addition to a reliable power source, you will require a compatible step signal source, such as a Programmable Logic Controller (PLC) or a motion controller. These step signals provide precise control over the motor's movement, enabling seamless operation and synchronization with your application. To ensure a safe electrical connection, the NI ISM-7400 incorporates an internal fuse that connects to the positive terminal of the power supply.
The NI ISM-7400 boasts three inputs to accommodate a range of control signals:
STEP: This input allows for precise control of the motor’s rotational movement, and it can accept logic signals in a range from 5 V to 24 V.
DIR: This high-speed digital input allows for control of the motor direction with incredible accuracy.
EN: This input allows the user to have full control over the power of the motor, allowing for rapid and precise adjustments.
| Model Name | ISM-7400 |
|---|---|
| Part Type | Isolated Stepper |
| Compatible With | NI 7330/7340/7350 Motion Controllers |
| Maximum Voltage | 30 VDC |
| Input Current | 5 mA typ at 4 V, 15 mA typ at 30 V |
| Rotor Inertia | 1.16 × 10 to 3 oz · sec2 |
| Dimensions | 1.71 × 2.20 × 2.64 in |
| Weight | 14.7 oz |
| Warranty | Three Year Warranty |
| ISM-7400 Manuals | PDFs Available for Download |
National Instruments ISM-7400 Frequently Asked Questions
Question: What controllers are the ISM-7400 compatible with?
Answer: The ISM-7400 stepper is made for use with NI 7330/7340/7350 motion controllers.
Question: What is the difference between the versions of the ISM-7400 stepper?
Answer: The ISM-7400 has a single-shaft, the ISM-7400D a dual-shaft, and the ISM-7400E a dual-shaft with a 1000-line incremental encoder.
Question: What's the maximum voltage of the ISM-7400?
Answer: The ISM-7400 is designed to support a supply voltage range of 12 VDC to 48 VDC,
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
