National Instruments 779502-01 Device for PXI Remote Control

The part number 779502-01 from National Instruments is the identifying part number for the PCIe-8362 Device for PXI Remote Control. The 779502-01 is a high-performance device that allows remote control of PXI systems over a PCI Express (PCIe) interface. It makes it easier for the PXI chassis and the host computer to integrate and exchange data quickly. In order for PXI systems to function well in a variety of test and measurement applications, PCIe functionality requires this module. It is small and easy to install without taking up much space, measuring 9.93 cm x 7.11 cm (3.91 x 2.8 inches) and weighing only 0.05 kg (0.12 pounds). It can be installed in most modern computer systems because it fits into a single, normal-height PCI Express slot. The device supports a maximum cable length of 7 meters, and system configuration.

Reliability and compatibility with a wide range of PCIe-based systems are guaranteed by the 779502-01 complete compatibility with the PCI Express Specification, Revision 1.0a. It has low power requirements, with the following normal and maximum current ratings: The +3.3 VAUX rail needs 10 mA on average and up to 50 mA at maximum, whereas the +3.3 V rail consumes 580 mA on average and up to 1.04 A at maximum. The efficient power consumption profile of the gadget is evident from the non-utilization of the +12 V rail. 

The 779502-01 Device for PXI Remote Control environmental requirements show how reliable and adaptable it is to a variety of operational environments. It operates between 0 degrees Celsius and 55 degrees Celsius in temperature and up to 2,000 meters in height. For functioning, the relative humidity ranges from 10% to 90%, noncondensing while for storage its temperature is -40 degrees Celsius to 70 degrees Celsius with relative humidity range of 5% to 95%, noncondensing.

The 779502-01, which satisfies the requirements for information technology equipment set forth by IEC 61010-1, EN 61010-1, UL 61010-1, and CSA 61010-1, prioritizes safety and compliance. The device satisfies multiple stringent standards for electromagnetic compatibility (EMC), including EN 61326-1 (IEC 61326-1), EN 55011 and ICES-001. These standards guarantee that the device's immunity and emissions are appropriate for usage in laboratories and industrial settings.