SH37F-37M In Stock | Ships Today

National Instruments SH37F-37M Shielded I/O Cable

The SH37F-37M (Part Numbers: 778621-01, 778621-02, 188841-01, 188841-02) is a 37-pin D-SUB, Shielded I/O Cable from National Instruments. The only difference between the part numbers is the length of the cable. Part number 778621-01 is 1 meter and part number 778621-02 is 2 meters. This cable comes with a 37-pin male D-SUB connector on one end and a 37-pin female D-SUB connector on the other end. The material used in the construction of these connectors ensures minimal coupling losses.   

The National Instruments SH37F-37M is a noise-reducing, high performance Shielded Cable. The NI SH37F-37M can be used for vast applications and offers seamless connectivity between various devices and connector blocks. Since it is a shielded cable, the SH37F-37M offers better performance in environments where electrical noise is inevitable. Shielded cables are always recommended for signal and data applications.

This cable can reduce the impact of the electrical noise on signal quality. Moreover, shielding is considered as a potential method of mitigating with electromagnetic radiation. The NI SH37F-37M is a multipurpose cable since it can be used with a variety of 37-pin National Instruments digital I/O devices. This Shielded Cable is rated to be used with voltages up to 150 VDC/VAC. This cable utilizes bundled 26 AWG wire. Each AWG wire has a maximum current rating of 2.0 A at 85 °C. These characteristics make the SH37F-37M Shielded Cable a viable solution for a wide range of applications. The NI SH37F-37M Cable can also be used with the CB-37F Connector Block.