National Instruments SHC68-68-RMIO Multifunction Cable

The NI SHC68-68-RMIO (Part Numbers: 189588-01, 189588-02, and 189588B-01) is a Multifunction Shielded Cable from National Instruments. The NI SHC68-68-RMIO is also referred to as the SHC68M-68F-RMIO Cable. The NI SHC68-68-RMIO is designed to provide connectivity to a terminal block of various multifunction reconfigurable devices and can be acquired in different lengths. This high-performance cable is specifically designed for the RMIO type connectors found in National Instruments R Series devices. These connectors offer multifunction I/O functionality. The NI SHC68-68-RMIO comes with individually shielded bundles– an arrangement that allows separated digital and analog signals.

 In these cables, a dedicated shielded twisted wire pair is utilized for each differential input channel. Analog outputs are also shielded individually. Moreover, a special technique is implemented in the construction of this cable to minimize crosstalk. National Instruments recommends this cable for connectivity to the MIO ports of the devices for the USB R Series, PXI-784xR, PXIe-784xR, PXIe-785xR, PXIe-786xR, or PXI-785xR cards. 

This high-performance 68-conductor cable comes terminated with a 68-pin 0.050 D-SUB female connector at one end and a VHDCI 68-pin male connector at the other end. The SHC68-68-RMIO Multifunction Cable is widely used in industries with intelligent DAQ devices such as the R Series. You can acquire this cable in either 1 meter or 2 meter length. With this cable, you will be able to get your R Series device connected to a terminal block. The NI SHC68-68-RMIO Multifunction Cable is an ideal solution for applications with strict EMC requirements.