Modular Systems > National Instruments > PCI CAN Interfaces
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
PCI-CAN-SW Request for Availablility
PCI-CAN/SW, 1-Port, CAN Interface Device
Need an Official Quote?
National Instruments PCI-CAN/SW CAN Interface Device
The PCI-CAN/SW is a single-wire CAN Interface Device by National Instruments. This device is available under part number 778795-01. The PCI-CAN/SW is used for CAN application development. For advanced functions, the PCI-CAN/SW device is equipped with a Philips SJA1000 CAN Controller. It offers various filtering modes for the PCI-CAN/SW interface board. This model can be synchronized with several PCI devices using an RTSI bus. This CAN Interface Device features hardware timing, timestamping, and synchronization with accuracy.
The PCI-CAN/SW CAN Interface Device is a single port device. However, a dual port version is also available with a different part number. The PCI-CAN/SW incorporates a male DB-9 connector. The board is interfaced with other devices through this connector. The transceiver used in the PCI-CAN/SW device is AU5790. The PCI-CAN/SW CAN Interface Device supports high-speed transmission with a maximum transfer rate of 83.333 kb/sec. The I/O channel of the PCI-CAN/SW draws a current of 750 mA. The power requirement of the I/O channel is +5 VDC. The PCI-CAN/SW device also filters the noise from the signal. This feature is FCC Class A verified.
The PCI-CAN/SW CAN Interface Device can be used in four different modes, including: normal, high-speed, sleep, and wake-up transceiver mode. The PCI-CAN/SW device is compatible with the standard as well as extended CAN arbitration IDs. The PCI-CAN/SW is used in various applications but is exclusively designed for automation applications. This CAN Interface Device can additionally be used in research applications and automotive CAN-based networks.
| Model | PCI-CAN/SW |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 778795-01 |
| Type | CAN Interface Device |
| Microprocessor | Intel 80386EX |
| Ports | 1 |
| Transceiver | AU5790 |
| Interface Type | ISO 11898 |
| Maximum Baud Rate | 83.333 Kb/sec |
| Minimum Baud Rate | 5 Kbps |
| I/O Connector | 9-pin male D-SUB |
| CAN_H Bus Line | –10 to +18 VDC |
| Isolation | Optical Isolation up to 500 V |
| Power Requirements | +5 VDC -- 750 mA |
| Dimensions | 8.150 in. by 6.9 in. |
| Software Driver | NI-CAN |
| Warranty | 2-3 Year Warranty |
| PCI-CAN/SW Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-CAN/SW Frequently Asked Questions
Question: Do I need an internal or external power supply for the PCI-CAN/SW?
Answer: The PCI-CAN/SW requires an external power source.
Question: How do I terminate my NI PCI-CAN/SW hardware without causing a communication failure?
Answer: The required load resistance for the network is 9.09 kohm. Your NI PCI-CAN/SW has a 9.09 kohm load resistor built in, so you do not need any additional resistors to terminate the hardware.
Question: Is it necessary to connect Vsup if I’m using the PCI-CAN/SW?
Answer: Yes, since the PCI-CAN/SW requires an external power source, the V+ is necessary to supply power.
PCI-CAN-SW PDF Manuals
NI CAN HARDWARE AND SOFTWARE MANUAL.PDF
NI DNET USER MANUAL AND SPECIFICATIONS.PDF
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCI-CAN-SW
Modular Systems > National Instruments > PCI CAN Interfaces
PCI-CAN/SW, 1-Port, CAN Interface Device
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
National Instruments PCI-CAN/SW CAN Interface Device
The PCI-CAN/SW is a single-wire CAN Interface Device by National Instruments. This device is available under part number 778795-01. The PCI-CAN/SW is used for CAN application development. For advanced functions, the PCI-CAN/SW device is equipped with a Philips SJA1000 CAN Controller. It offers various filtering modes for the PCI-CAN/SW interface board. This model can be synchronized with several PCI devices using an RTSI bus. This CAN Interface Device features hardware timing, timestamping, and synchronization with accuracy.
The PCI-CAN/SW CAN Interface Device is a single port device. However, a dual port version is also available with a different part number. The PCI-CAN/SW incorporates a male DB-9 connector. The board is interfaced with other devices through this connector. The transceiver used in the PCI-CAN/SW device is AU5790. The PCI-CAN/SW CAN Interface Device supports high-speed transmission with a maximum transfer rate of 83.333 kb/sec. The I/O channel of the PCI-CAN/SW draws a current of 750 mA. The power requirement of the I/O channel is +5 VDC. The PCI-CAN/SW device also filters the noise from the signal. This feature is FCC Class A verified.
The PCI-CAN/SW CAN Interface Device can be used in four different modes, including: normal, high-speed, sleep, and wake-up transceiver mode. The PCI-CAN/SW device is compatible with the standard as well as extended CAN arbitration IDs. The PCI-CAN/SW is used in various applications but is exclusively designed for automation applications. This CAN Interface Device can additionally be used in research applications and automotive CAN-based networks.
| Model | PCI-CAN/SW |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 778795-01 |
| Type | CAN Interface Device |
| Microprocessor | Intel 80386EX |
| Ports | 1 |
| Transceiver | AU5790 |
| Interface Type | ISO 11898 |
| Maximum Baud Rate | 83.333 Kb/sec |
| Minimum Baud Rate | 5 Kbps |
| I/O Connector | 9-pin male D-SUB |
| CAN_H Bus Line | –10 to +18 VDC |
| Isolation | Optical Isolation up to 500 V |
| Power Requirements | +5 VDC -- 750 mA |
| Dimensions | 8.150 in. by 6.9 in. |
| Software Driver | NI-CAN |
| Warranty | 2-3 Year Warranty |
| PCI-CAN/SW Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCI-CAN/SW Frequently Asked Questions
Question: Do I need an internal or external power supply for the PCI-CAN/SW?
Answer: The PCI-CAN/SW requires an external power source.
Question: How do I terminate my NI PCI-CAN/SW hardware without causing a communication failure?
Answer: The required load resistance for the network is 9.09 kohm. Your NI PCI-CAN/SW has a 9.09 kohm load resistor built in, so you do not need any additional resistors to terminate the hardware.
Question: Is it necessary to connect Vsup if I’m using the PCI-CAN/SW?
Answer: Yes, since the PCI-CAN/SW requires an external power source, the V+ is necessary to supply power.
PCI-CAN-SW PDF Manuals & Diagrams
PCI-CAN-SW PDF Manuals
NI CAN HARDWARE AND SOFTWARE MANUAL.PDF
NI DNET USER MANUAL AND SPECIFICATIONS.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
