Modular Systems > National Instruments > PXI IF Conditioning Modules

National Instruments - PXI IF Conditioning Modules - 782550-01National Instruments - PXI IF Conditioning Modules - 782550-01 - Wiring782550-01 New782550-01 | Legacy, Refurbished and New Surplus
National Instruments - PXI IF Conditioning Modules - 782550-01
National Instruments - PXI IF Conditioning Modules - 782550-01 - Wiring
782550-01 New
782550-01 | Legacy, Refurbished and New Surplus
Same Day Calibration Available
2-3 Year Warranty Included
Free Ground Shipping

Or speak to a sales representative for additional information:


782550-01 Request for Availablility

782550-01, 465 g, 200 μs, 187.5 MHz, PXIe-5694 IF Conditioning Module
5/5 | 8 ratings
Fast Quote
Quoted Price

Need an Official Quote?

 

National Instruments 782550-01 IF Conditioning Module

The National Instruments 782550-01 (PXIe-5694) IF Conditioning Module is a versatile component designed for signal conditioning in RF applications. This PXI Express module is equipped with advanced features that facilitate the downconversion and filtering of intermediate frequency (IF) signals. The front panel includes five SMA connectors and two LED indicators that enable easy integration and monitoring within various setups.

The 782550-01 module offers multiple signal paths, including bypass, downconversion disabled and downconversion-enabled modes. Each mode provides distinct input and output center frequencies that allow users to select the most appropriate configuration for their specific application. The bypass mode operates at a nominal center frequency of 187.5 MHz while the downconversion disabled mode operates at 193.6 MHz. The downconversion enabled mode shifts the output center frequency to 21.4 MHz and supports applications requiring lower frequency signal processing.

The NI 782550-01 module features several bandpass filters with varying bandwidths ranging from 30 kHz to 160 MHz. These filters are critical for refining the signal by eliminating unwanted frequencies and enhancing the overall signal quality. The module offers high rejection rates and low phase noise depending on the selected filter. The module's phase noise characteristics are particularly notable with values as low as -155 dBc/Hz at a 1 MHz offset. The 782550-01 IF conditioning unit also supports gain control with step gain adjustments that allow for fine-tuning of the signal amplitude. In bypass mode, the gain is typically around -1.5 dB while in downconversion modes it can be adjusted between 4.1 dB and 19.3 dB depending on the enabled state.

This flexibility in gain control combined with the module's high third order intercept points contributes to its excellent linearity.This conditioning module is designed to fit into a single PXI Express slot. The module has dimensions of 21.6 cm × 2.0 cm × 13.0 cm and a weight of 465 g. The module operates within a temperature range of 0 °C to 55 °C and is compliant with various safety and electromagnetic compatibility standards. The module's connectors and power requirements are designed for optimal performance with safe input voltage ranges and maximum power handling capabilities that protect the device during operation.
 

Part Number782550-01
Model NamePXIe-5694
Part TypeIF Conditioning Module
Input Center Frequency187.5 MHz
Output Center Frequency187.5 MHz
Settling Time Gain Path200 μs
Nominal Current at 3.3 V1.31 A
Dimensions21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.)
Weight465 g (16.4 oz)
Warranty2 - 3 years


Why Buy From Apex Waves:

Apex Waves Youtube Video

"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"


"They were very helpful to get me the test equipment that I need."



Delivery:    
UPS, FedEX and DHL – Free Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Warranty: All of our products are covered by our Apex Waves Warranty.
3 Year Warranty - New Surplus Parts
2 Year Warranty - Refurbished Parts
Returns: No hassle return policy.
Dedicated customer service team.
Payment: Authorize.net Visa Master Card American Express BB&T Better Business Bureau Dun & Bradstreet
Quick Quotes: Receive Price & Availability Today!
Calibration: Ask About Our Tiered Calibration Levels
Option & Modules: Confirm Your Requirements or Versions
Repair: Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Share this page: Facebook Icon Twitter Icon LinkedIn Icon
Common Typos: Y82550-01, I82550-01, 7I2550-01, 782T50-01, 782550-0W

782550-01



Modular Systems > National Instruments > PXI IF Conditioning Modules

782550-01, 465 g, 200 μs, 187.5 MHz, PXIe-5694 IF Conditioning Module
5/5 | 8 ratings

Call now for best pricing
1-800-915-6216

National Instruments 782550-01 IF Conditioning Module

The National Instruments 782550-01 (PXIe-5694) IF Conditioning Module is a versatile component designed for signal conditioning in RF applications. This PXI Express module is equipped with advanced features that facilitate the downconversion and filtering of intermediate frequency (IF) signals. The front panel includes five SMA connectors and two LED indicators that enable easy integration and monitoring within various setups.

The 782550-01 module offers multiple signal paths, including bypass, downconversion disabled and downconversion-enabled modes. Each mode provides distinct input and output center frequencies that allow users to select the most appropriate configuration for their specific application. The bypass mode operates at a nominal center frequency of 187.5 MHz while the downconversion disabled mode operates at 193.6 MHz. The downconversion enabled mode shifts the output center frequency to 21.4 MHz and supports applications requiring lower frequency signal processing.

The NI 782550-01 module features several bandpass filters with varying bandwidths ranging from 30 kHz to 160 MHz. These filters are critical for refining the signal by eliminating unwanted frequencies and enhancing the overall signal quality. The module offers high rejection rates and low phase noise depending on the selected filter. The module's phase noise characteristics are particularly notable with values as low as -155 dBc/Hz at a 1 MHz offset. The 782550-01 IF conditioning unit also supports gain control with step gain adjustments that allow for fine-tuning of the signal amplitude. In bypass mode, the gain is typically around -1.5 dB while in downconversion modes it can be adjusted between 4.1 dB and 19.3 dB depending on the enabled state.

This flexibility in gain control combined with the module's high third order intercept points contributes to its excellent linearity.This conditioning module is designed to fit into a single PXI Express slot. The module has dimensions of 21.6 cm × 2.0 cm × 13.0 cm and a weight of 465 g. The module operates within a temperature range of 0 °C to 55 °C and is compliant with various safety and electromagnetic compatibility standards. The module's connectors and power requirements are designed for optimal performance with safe input voltage ranges and maximum power handling capabilities that protect the device during operation.
 

Part Number782550-01
Model NamePXIe-5694
Part TypeIF Conditioning Module
Input Center Frequency187.5 MHz
Output Center Frequency187.5 MHz
Settling Time Gain Path200 μs
Nominal Current at 3.3 V1.31 A
Dimensions21.6 cm × 2.0 cm × 13.0 cm (8.5 in. × 0.8 in. × 5.1 in.)
Weight465 g (16.4 oz)
Warranty2 - 3 years

Why Buy From Apex Waves

Apex Waves Youtube Video

"The business transaction was super easy and friendly."


"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"


"They were very helpful to get me the test equipment that I need."


Delivery: UPS, FedEX and DHL – Free FedEx Ground on all orders
Overnight, Next Day Air or Expedited shipping options available
International delivery available
Same day shipping for in-stock on location
Warranty: All of our products are covered by our Apex Waves Warranty.
3 Year Warranty - New Surplus Parts
2 Year Warranty - Refurbished Parts
Returns: No hassle return policy.
Dedicated customer service team.
Payment: Authorize.Net paypal visa card master card american express card BB&T Bank better business bureau
Quick Quotes: Receive Price & Availability Today!
Calibration: Ask About Our Tiered Calibration Levels
Option & Modules: Confirm Your Requirements or Versions
Repair: Cost & Lead Time Available Upon Request for Service
Repair Evaluation: $150
Share this page: facebook twitter linkedIn