National Instruments SH160DIN-SH160DIN

The National Instruments SH160DIN-SH160DIN (Part Numbers: 782417-02, 781090-02) cable is made especially to connect to PXI Relay Modules that are compatible with the PXI-2510 PXI Signal Insertion Switch Module. It makes signal routing between test devices (DUTs) and instruments easier.

The cable features a 160-Pin female DIN connector on one end, providing connection to the NI PXI-252x and NI PXI-2510 modules. At the opposite end of the cable are eight bundles of unterminated, tinned, and stripped wires identified as P1-P8 legs, four 50-pin female D-SUB connectors, and a second 160-Pin DIN connection. The connectors and wires enable smooth application integration. The cable guarantees dependable and secure operation with a maximum voltage rating of 150V (CAT I) and a maximum current per pin of 2A. It is crucial to remember that 115 or 230 VAC mains supply circuits, such as wall outlets, should not be connected to this line.

The operating temperature range for the SH160DIN-SH160DIN cable is 0°C to 55°C, and it may be kept in a temperature range of -20°C to 70°C. With a pollution degree of two and a relative humidity range of 5% to 85% (non-condensing), it is appropriate for indoor usage. The operational altitude maximum is two thousand meters. For more flexibility, this cable may be utilized with third-party accessories including a right-angle 50-position male D-SUB connector and a VARIOFACE module with a screw connection and 50-position D-Subminiature male connector.

This product complies with electrical equipment safety standards including IEC 61010-1, EN 61010-1, UL 61010-1, and CSA 61010-1. It also has to be used with shielded accessories in order to meet Electromagnetic Compatibility (EMC) regulations.