Modular Systems > National Instruments > C Series
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
USB-8473 In Stock | Ships Today
NI USB-8473, High-Speed, 2 Meter USB Wire, CAN Interface Device
Need an Official Quote?
National Instruments USB-8473 CAN Interface Device
NI USB-8473 (Part Numbers: 779792-01, 779793-01, 194210C-01) is a high-speed CAN (Controller Area Network) interface module by National Instruments that is intended for CAN application development in automotive and industrial automation systems. In order to meet the needs of different applications, this module offers crucial features including listen-only mode, self-reception (echo), and advanced filtering modes.
With its HI-Speed USB interface, the USB-8473 makes it simple to connect to a host computer and uses the USB bus to supply power. With its integrated transceiver and captive 2-meter USB wire, its all-in-one design eliminates the need for other accessories for speedy setup. In order to provide compatibility with a broad range of CAN networks, including J1939 networks frequently used in automotive applications, this module supports CAN 2.0A (11-bit) and extended CAN 2.0B (29-bit) arbitration IDs.
Exact data acquisition and synchronization between various devices are made possible by the USB-8473 module's optional hardware synchronization and timestamping resolution. The synchronization features are only available on the USB-847x devices like the USB-8473, and it has time stamping capabilites for timebases of 1, 10 or 20 MHz. Reconstructing network events and establishing connections between synchronized devices depend on users being able to log messages with microsecond-accurate timestamps, which hardware timestamping enables.
By utilizing integrated frame buffering and Hi-Speed USB connectivity, the USB-8473 prevents dropped frames during operation to ensure dependable performance even under high bus loads. High-speed and low-speed/fault-tolerant choices are available in the physical layer of the module, and onboard transceivers offer electrical isolation of up to 500 V. The setup procedure is made simpler by this integrated physical layer, which does away with the requirement for extra dongles.
Tight integration of CAN, LIN, analog, and digital measurements is frequently needed in automotive applications. In order to meet this requirement, the USB-8473 module provides hardware synchronization features that let users synchronize timing and trigger signals across many devices for deterministic operation.
| Model | USB-8473 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 779792-01, 194210C-01 |
| Type | CAN Interface Device |
| Ports | 1 |
| Transceiver Type | Philips TJA1041 |
| Controller Type | Philips SJA1000 CAN |
| Physical Layer | High-Speed CAN |
| Max Baud Rate | up to 1 Mbps |
| Maximum Transfer Rate | 1,000 kbit/s |
| Dimensions | 3.1 in. × 2.5 in.× 1.0 in. (7.87 cm × 6.35 cm × 2.54 cm) [Non-Sync] 3.1 in. × 2.8 in. × 1.0 in. (7.87 cm × 7.11 cm × 2.54 cm) [Sync] |
| Operating Temp Range | 0° to 55 °C |
| Storage Temp Range | –20° to 70 °C |
| Warranty | Three Year Warranty |
| USB-8473 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for the USB-8473:
194210A-01, 194210A-02, 194210B-01, 194210C-01, 194210C-02, 194210D-01L, 194210D-02L, 779792-01, 779792-02, 779793-01, 779793-02
Associated NSNs for the USB-8473:
7025-01-579-4683 (7025015794683), 7025015794683, 5998-01-657-5603 (5998016575603)
National Instruments USB-8473 Frequently Asked Questions
Question: What is the NI USB-8473 driver called?
Answer: The NI USB-8473 driver is NI-CAN.
Question: Does the USB-8473 NI have a hardware sync feature?
Answer: No, the USB-8473 NI does not have a hardware sync feature.
Question: Which type of connector does the USB-8473 National Instruments have?
Answer: The USB-8473 National Instruments has a standard 9-pin male D-SUB (DB9) connector.
Question: What LEDs does the USB-8473 have?
Answer: The NI USB-8473 features two LED Indicators, labeled USB and CAN.
USB-8473 PDF Manuals
ARCHIVED DRIVVEN NOX SENSOR MODULE KIT FOR USB USER MANUAL.PDF
NI CAN HARDWARE AND SOFTWARE MANUAL.PDF
USB-8473 8473S 8476 8476S LETTER OF VOLATILITY.PDF
Driver Downloads for USB-8473
OS Compatibility:
Win XP 32-bit, Win 7 32-bit, Win 10 32-bit
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
USB-8473
Modular Systems > National Instruments > C Series
NI USB-8473, High-Speed, 2 Meter USB Wire, CAN Interface Device
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Manuals & PDFs
- Drivers
National Instruments USB-8473 CAN Interface Device
NI USB-8473 (Part Numbers: 779792-01, 779793-01, 194210C-01) is a high-speed CAN (Controller Area Network) interface module by National Instruments that is intended for CAN application development in automotive and industrial automation systems. In order to meet the needs of different applications, this module offers crucial features including listen-only mode, self-reception (echo), and advanced filtering modes.
With its HI-Speed USB interface, the USB-8473 makes it simple to connect to a host computer and uses the USB bus to supply power. With its integrated transceiver and captive 2-meter USB wire, its all-in-one design eliminates the need for other accessories for speedy setup. In order to provide compatibility with a broad range of CAN networks, including J1939 networks frequently used in automotive applications, this module supports CAN 2.0A (11-bit) and extended CAN 2.0B (29-bit) arbitration IDs.
Exact data acquisition and synchronization between various devices are made possible by the USB-8473 module's optional hardware synchronization and timestamping resolution. The synchronization features are only available on the USB-847x devices like the USB-8473, and it has time stamping capabilites for timebases of 1, 10 or 20 MHz. Reconstructing network events and establishing connections between synchronized devices depend on users being able to log messages with microsecond-accurate timestamps, which hardware timestamping enables.
By utilizing integrated frame buffering and Hi-Speed USB connectivity, the USB-8473 prevents dropped frames during operation to ensure dependable performance even under high bus loads. High-speed and low-speed/fault-tolerant choices are available in the physical layer of the module, and onboard transceivers offer electrical isolation of up to 500 V. The setup procedure is made simpler by this integrated physical layer, which does away with the requirement for extra dongles.
Tight integration of CAN, LIN, analog, and digital measurements is frequently needed in automotive applications. In order to meet this requirement, the USB-8473 module provides hardware synchronization features that let users synchronize timing and trigger signals across many devices for deterministic operation.
| Model | USB-8473 |
|---|---|
| Manufacturer | National Instruments |
| Part Number | 779792-01, 194210C-01 |
| Type | CAN Interface Device |
| Ports | 1 |
| Transceiver Type | Philips TJA1041 |
| Controller Type | Philips SJA1000 CAN |
| Physical Layer | High-Speed CAN |
| Max Baud Rate | up to 1 Mbps |
| Maximum Transfer Rate | 1,000 kbit/s |
| Dimensions | 3.1 in. × 2.5 in.× 1.0 in. (7.87 cm × 6.35 cm × 2.54 cm) [Non-Sync] 3.1 in. × 2.8 in. × 1.0 in. (7.87 cm × 7.11 cm × 2.54 cm) [Sync] |
| Operating Temp Range | 0° to 55 °C |
| Storage Temp Range | –20° to 70 °C |
| Warranty | Three Year Warranty |
| USB-8473 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments USB-8473 Frequently Asked Questions
Question: What is the NI USB-8473 driver called?
Answer: The NI USB-8473 driver is NI-CAN.
Question: Does the USB-8473 NI have a hardware sync feature?
Answer: No, the USB-8473 NI does not have a hardware sync feature.
Question: Which type of connector does the USB-8473 National Instruments have?
Answer: The USB-8473 National Instruments has a standard 9-pin male D-SUB (DB9) connector.
Question: What LEDs does the USB-8473 have?
Answer: The NI USB-8473 features two LED Indicators, labeled USB and CAN.
USB-8473 PDF Manuals & Diagrams
USB-8473 PDF Manuals
ARCHIVED DRIVVEN NOX SENSOR MODULE KIT FOR USB USER MANUAL.PDF
NI CAN HARDWARE AND SOFTWARE MANUAL.PDF
USB-8473 8473S 8476 8476S LETTER OF VOLATILITY.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
