National Instruments 785148-01  Smart Camera

Part Number 785148-01 is the identifying part number for the National Instruments ISC-1782 Smart Camera. The 785148-01 ships with a dual-core Intel Celeron N2807 processor with a base frequency of 1.58GHz and a burst frequency (enabled by default) of 2.16 GHz. Likewise, it features 2 GB DDR3L of SDRAM and a nonvolatile storage of 32 GB. The module supports the NI Linux Real-Time 64-bit and the Windows 10 Enterprise 2016 LTSB 64-bit operating system.

The 785148-01 comes with an ON Semiconductor - Python family (NOIP1SN or NOIP1SE) image sensor that is of CMOS-type and has an optical format of 3/2 in. and a resolution of 1920 x 1200 pixels (2 MP). The frame rate is up to 45.8 fps for monochrome and up to 19.9 fps for color. The pixel size is  4.8 x 4.8 µm while the shutter speed is 50 µs to 4.2 s.  Furthermore, the network port supports the following standards: IEEE 802.3 Ethernet, 100BASETX, and 1000BASE-T. The speed can be 100 or 1000 Mbps depending on the standard used. 

The 785148-01 consumes 10.8 W  of power (or 450 mA at 24 VDC). The rated current is 0.6 A while the supply voltage is 24 VDC ± 10%. Note that the device can only be powered on using a 24 VDC power source. The 785148-01 features 4 digital input channels. For NI Linux Real-Time systems, 3 of these are general purpose inputs while 1 is reserved input for safe mode. On the other hand, for Windows-based systems, all 4 of the channels are general-purpose inputs. 

The inputs can be current sinking or current sourcing and the maximum input current is 3.5 mA. The input voltage rate is 0 V to 24 V. Additionally, the module also has 3 digital output channels that operate in the current-sinking mode and have an operating voltage of 24 V and sink current of 50 mA maximum. Moreover, there is also a 0 to 10 V analog control output signal for lighting control. The module operates at 0 °C to 50 °C at a relative humidity of 10% to 90%.