Modular Systems > National Instruments > X Series
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
PCIe-6353 Request for Availablility
PCIe-6353, 16 Bit Resolution, 68-Pin VHDCI Connectors, Multifunction I/O Device
Need an Official Quote?
National Instruments PCIe-6353 Multifunction I/O Device
The PCIe-6353 is a high-speed Multifunction I/O Device from National Instruments. The PCIe-6353 is available under part number 781049-01. The PCIe-6353 is a 16-bit X-Series DAQ Device. The PCIe-6353 device implements NI-STC3 technology. This technology ensures high performance in timing and synchronization functions. The supported bus connector for the PCIe-6353 is PCI Express.
The NI PCIe-6353 X Series model offers different types of channels. It includes differential and single ended channels. The device has 32 single ended channels. It also includes 16 differential terminals at the input. These terminals are analog. It also features the flexibility to select these terminals with the help of software. This device has the sampling rate of 1.25 MS per second. The PCIe-6353 X-Series device does not support simultaneous sampling. This model has a resolution of 10 nanoseconds for timing for its 4 analog outputs (with a 16-bit resolution and a sampling rate of 2.86 MS/s). The PCIe-6353 device comes with built-in analog input FIFO buffers. The PCIe-6353 device also has 48 terminals that can be programmed. These digital terminals are integrated for both the inputs and outputs of the device.
The PCIe-6353 Multifunction I/O Device has four counters or timers as well. They have 32 bits resolution. These counters are used for different purposes like PWM, event counting, encoding, and frequency. The PCIe-6353 comes with a built-in frequency generator, which is equipped with three base clocks. Their frequencies are fixed at the following values: 100 kHz, 10 MHz, and 20 MHz. The PCIe-6353 comes with two 68-pin VHDCI female connectors for different functions.
The PCIe-6353 is run using the NIDAQmx driver software which is compatible with software packages or application development environments (ADEs) such as LabVIEW, LabWindows/CVI, or Measurement Studio. The I/O device has a recommended warm-up time of 15 minutes, and should be externally calibrated at least once in 2 years.
The NI device weighs 0.37 lb, and measures 3.9 x 6.6 in. in physical dimensions. It has recommended operating and storage temperature ranges of 0 to 50 °C and -40 to 70 ºC respectively, non-condensing operating and storage humidity ranges of 10 to 90% RH and 5 to 95% RH respectively.
| Model | PCIe-6353 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 781049-01, 193522C-02L |
| Series | X Series |
| Type | Multifunction I/O Device |
| Analog Input Channels | 32 (16-Bit, 1.25 MS/s) or 16 differential |
| Analog Output Channels | 4 (16-Bit, 2.86 MS/s) |
| Digital Inputs | 16 |
| Digital Outputs | 32 |
| Timing I/O | 4 Counter/Timer I/O (32 bits, 100 MHz) |
| Frequency Generator Channels | 1 |
| Phase-Locked Loop Channels | 1 |
| I/O Connectors | 2 68-pin VHDCI |
| Power Requirements | +3.3 V, +12 V -- 1A, 4.6 W, 5.4 W |
| Dimensions | 3.9 in. × 6.6 in. |
| Weight | 0.37 lb. |
| Driver Software | NI-DAQmx |
| Warranty | Three Year Warranty |
| PCIe-6353 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
Associated part numbers for the PCIe-6353:
193522A-02L, 193522B-02L, 193522C-02L, 193522D-02L, 781049-01
National Instruments PCIe-6353 Frequently Asked Questions
Question: What is the ADC resolution of the PCIe-6353?
Answer: The ADC resolution of the PCIe-6353 is 16 bits.
Question: What is the sample rate for the PCIe-6353?
Answer: For a single channel, the maximum sample rate is 1.25 MS/s. For multiple channels, the aggregate maximum is 1.00 MS/s. There is no minimum sample rate for the PCIe-6353.
Question: What is the timing resolution and accuracy of the PCIe-6353?
Answer: The timing resolution is 10 ns, while the timing accuracy is 50 ppm of the sample rate.
| Accessory Type | Model Name | Part Number |
|---|---|---|
| Cable | SHC68-68-EPM | 192061-01 (1 m) |
| 192061-02 (2 m) | ||
| 192061-05 (5 m) | ||
| 192061-0R5 (0.5 m) | ||
| RC68-68 | 187252-01 (1 m) | |
| 187252-0R25 (0.25 m) | ||
| 187252-0R5 (0.5 m) | ||
| Shielded Connector Block | SCB-68A | 782536-01 |
| Shielded BNC Connector | BNC-2110 | 777643-01 |
| Rack-Mountable Accessory | BNC-2090A (Rackmount) | 779556-01 |
| Terminal Block | TB-2706 | 779183-01 |
| Connector Block | TBX-68 | 777141-01 |
| CB-68LP (Vertical Mount) | 777145-01 | |
| CB-68LPR (Right Angle Mount) | 777145-02 | |
| - | - | - |
PCIe-6353 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68 NOTE TO USERS.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68A NOTE TO USERS.PDF
NI 6353 DEVICE SPECIFICATIONS.PDF
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
PCIe-6353
Modular Systems > National Instruments > X Series
PCIe-6353, 16 Bit Resolution, 68-Pin VHDCI Connectors, Multifunction I/O Device
1-800-915-6216
- Description
- Technical Specifications
- FAQ
- Compatible Accessories
- Manuals & PDFs
National Instruments PCIe-6353 Multifunction I/O Device
The PCIe-6353 is a high-speed Multifunction I/O Device from National Instruments. The PCIe-6353 is available under part number 781049-01. The PCIe-6353 is a 16-bit X-Series DAQ Device. The PCIe-6353 device implements NI-STC3 technology. This technology ensures high performance in timing and synchronization functions. The supported bus connector for the PCIe-6353 is PCI Express.
The NI PCIe-6353 X Series model offers different types of channels. It includes differential and single ended channels. The device has 32 single ended channels. It also includes 16 differential terminals at the input. These terminals are analog. It also features the flexibility to select these terminals with the help of software. This device has the sampling rate of 1.25 MS per second. The PCIe-6353 X-Series device does not support simultaneous sampling. This model has a resolution of 10 nanoseconds for timing for its 4 analog outputs (with a 16-bit resolution and a sampling rate of 2.86 MS/s). The PCIe-6353 device comes with built-in analog input FIFO buffers. The PCIe-6353 device also has 48 terminals that can be programmed. These digital terminals are integrated for both the inputs and outputs of the device.
The PCIe-6353 Multifunction I/O Device has four counters or timers as well. They have 32 bits resolution. These counters are used for different purposes like PWM, event counting, encoding, and frequency. The PCIe-6353 comes with a built-in frequency generator, which is equipped with three base clocks. Their frequencies are fixed at the following values: 100 kHz, 10 MHz, and 20 MHz. The PCIe-6353 comes with two 68-pin VHDCI female connectors for different functions.
The PCIe-6353 is run using the NIDAQmx driver software which is compatible with software packages or application development environments (ADEs) such as LabVIEW, LabWindows/CVI, or Measurement Studio. The I/O device has a recommended warm-up time of 15 minutes, and should be externally calibrated at least once in 2 years.
The NI device weighs 0.37 lb, and measures 3.9 x 6.6 in. in physical dimensions. It has recommended operating and storage temperature ranges of 0 to 50 °C and -40 to 70 ºC respectively, non-condensing operating and storage humidity ranges of 10 to 90% RH and 5 to 95% RH respectively.
| Model | PCIe-6353 |
|---|---|
| Manufacturer | National Instruments |
| Part Numbers | 781049-01, 193522C-02L |
| Series | X Series |
| Type | Multifunction I/O Device |
| Analog Input Channels | 32 (16-Bit, 1.25 MS/s) or 16 differential |
| Analog Output Channels | 4 (16-Bit, 2.86 MS/s) |
| Digital Inputs | 16 |
| Digital Outputs | 32 |
| Timing I/O | 4 Counter/Timer I/O (32 bits, 100 MHz) |
| Frequency Generator Channels | 1 |
| Phase-Locked Loop Channels | 1 |
| I/O Connectors | 2 68-pin VHDCI |
| Power Requirements | +3.3 V, +12 V -- 1A, 4.6 W, 5.4 W |
| Dimensions | 3.9 in. × 6.6 in. |
| Weight | 0.37 lb. |
| Driver Software | NI-DAQmx |
| Warranty | Three Year Warranty |
| PCIe-6353 Manual | User Manual and Maintenance Manual Available for Download |
| Price | Contact a sales representative for a quote. |
National Instruments PCIe-6353 Frequently Asked Questions
Question: What is the ADC resolution of the PCIe-6353?
Answer: The ADC resolution of the PCIe-6353 is 16 bits.
Question: What is the sample rate for the PCIe-6353?
Answer: For a single channel, the maximum sample rate is 1.25 MS/s. For multiple channels, the aggregate maximum is 1.00 MS/s. There is no minimum sample rate for the PCIe-6353.
Question: What is the timing resolution and accuracy of the PCIe-6353?
Answer: The timing resolution is 10 ns, while the timing accuracy is 50 ppm of the sample rate.
| Accessory Type | Model Name | Part Number |
|---|---|---|
| Cable | SHC68-68-EPM | 192061-01 (1 m) |
| 192061-02 (2 m) | ||
| 192061-05 (5 m) | ||
| 192061-0R5 (0.5 m) | ||
| RC68-68 | 187252-01 (1 m) | |
| 187252-0R25 (0.25 m) | ||
| 187252-0R5 (0.5 m) | ||
| Shielded Connector Block | SCB-68A | 782536-01 |
| Shielded BNC Connector | BNC-2110 | 777643-01 |
| Rack-Mountable Accessory | BNC-2090A (Rackmount) | 779556-01 |
| Terminal Block | TB-2706 | 779183-01 |
| Connector Block | TBX-68 | 777141-01 |
| CB-68LP (Vertical Mount) | 777145-01 | |
| CB-68LPR (Right Angle Mount) | 777145-02 | |
| - | - | - |
PCIe-6353 PDF Manuals & Diagrams
PCIe-6353 PDF Manuals
DAQ GETTING STARTED GUIDE FOR PCI PCI EXPRESS.PDF
DAQ GETTING STARTED READ ME FIRST NI DAQMX AND DAQ DEVICE INSTALLATION GUIDE.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68 NOTE TO USERS.PDF
NI 62XX 63XX PINOUT LABELS FOR THE SCB 68A NOTE TO USERS.PDF
NI 6353 DEVICE SPECIFICATIONS.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
