Test & Measurement Misc > National Instruments > Terminal Blocks
Or speak to a sales representative for additional information:
Phone:1-800-915-6216
Email:sales@apexwaves.com
CAL-9214 Request for Availablility
CAL-9214, 23°C ±5°C; RH < 80%, 16 Input Channels, NI Calibration Terminal Block
Need an Official Quote?
National Instruments CAL-9214 Calibration Terminal Block
The CAL-9214 (Part Number: 781771-01) is a National Instruments-designed special-purpose calibration terminal block to be used with the high-precision NI 9214 thermocouple input module. The CAL-9214 is able to perform exacting calibration via solid connections of the 16 channels for thermocouples and 3 for cold-junction compensations in the module. It's the perfect complement that will assure one that an accurate result would be gained by the use of the NI 9214 at temperature measurements.
The CAL-9214 connects directly to the front connector of the NI 9214 and is securely fastened using two jackscrews. The system of connection ensures stability without the slightest chance of interference or loss of signal. The design has a pinout configuration for precision calibration and testing, thus allowing the connection of high-accuracy voltage and resistance calibrators. The CAL-9214 should be correctly installed without overtightening the screws for continued functionality.
This terminal block is critical in calibration and verification procedures. It allows for controlled testing of voltage and resistance across the NI 9214's channels, supporting verification of as-found and as-left conditions. During calibration, the CAL-9214 allows for adjustments to the NI 9214 voltage and CJC channels to meet specified accuracy requirements under defined environmental conditions. It also extends to updating EEPROM for keeping calibration coefficients and settings directly in the module for performance consistency.
The CAL-9214 uses a certain specification in environmental parameters for optimal results. The ambient temperature it requires is 23°C ±5°C; shielded copper wire should be used to reduce noise and thermal offsets. Safety and functionality require not connecting voltages over 10 VDC with the CAL-9214. Extremely robust, the compatibility of a high-precision calibration system like Fluke 5520A makes it an ideal choice in many high-demand industrial and laboratory requirements.
| Model Name | CAL-9214 |
|---|---|
| Part Number | 781771-01 |
| Part Type | Calibration Terminal Block |
| Thermocouple Channels | 16 Input Channels |
| CJC Channels | 3 cold-junction compensation channels |
| Connection Type | Direct to NI 9214 front connector |
| Voltage Range | Up to 10 VDC |
| Environmental Conditions | 23°C ±5°C; RH < 80% |
| Compatibility | For NI 9214 module |
| Secure Mounting | Dual jackscrews |
National Instruments CAL-9214 Frequently Asked Questions
Question: What is the role of the CAL-9214 in the PXIe-9214?
Answer: The CAL-9214 Calibration Terminal Block streamlines the calibration of the NI-9214 module.
Question: Does the CAL-9214 work with other NI modules?
Answer: No, the CAL-9214 is built specifically for the NI 9214.
Question: What calibrators is the CAL-9214 compatible?
Answer: The CAL-9214 is compatible with Fluke 5520A and 5522A calibrators.
Why Buy From Apex Waves:
Verified
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
CAL-9214
Test & Measurement Misc > National Instruments > Terminal Blocks
CAL-9214, 23°C ±5°C; RH < 80%, 16 Input Channels, NI Calibration Terminal Block
1-800-915-6216
- Description
- Technical Specifications
- Frequently Asked Questions
- Manuals & PDFs
National Instruments CAL-9214 Calibration Terminal Block
The CAL-9214 (Part Number: 781771-01) is a National Instruments-designed special-purpose calibration terminal block to be used with the high-precision NI 9214 thermocouple input module. The CAL-9214 is able to perform exacting calibration via solid connections of the 16 channels for thermocouples and 3 for cold-junction compensations in the module. It's the perfect complement that will assure one that an accurate result would be gained by the use of the NI 9214 at temperature measurements.
The CAL-9214 connects directly to the front connector of the NI 9214 and is securely fastened using two jackscrews. The system of connection ensures stability without the slightest chance of interference or loss of signal. The design has a pinout configuration for precision calibration and testing, thus allowing the connection of high-accuracy voltage and resistance calibrators. The CAL-9214 should be correctly installed without overtightening the screws for continued functionality.
This terminal block is critical in calibration and verification procedures. It allows for controlled testing of voltage and resistance across the NI 9214's channels, supporting verification of as-found and as-left conditions. During calibration, the CAL-9214 allows for adjustments to the NI 9214 voltage and CJC channels to meet specified accuracy requirements under defined environmental conditions. It also extends to updating EEPROM for keeping calibration coefficients and settings directly in the module for performance consistency.
The CAL-9214 uses a certain specification in environmental parameters for optimal results. The ambient temperature it requires is 23°C ±5°C; shielded copper wire should be used to reduce noise and thermal offsets. Safety and functionality require not connecting voltages over 10 VDC with the CAL-9214. Extremely robust, the compatibility of a high-precision calibration system like Fluke 5520A makes it an ideal choice in many high-demand industrial and laboratory requirements.
| Model Name | CAL-9214 |
|---|---|
| Part Number | 781771-01 |
| Part Type | Calibration Terminal Block |
| Thermocouple Channels | 16 Input Channels |
| CJC Channels | 3 cold-junction compensation channels |
| Connection Type | Direct to NI 9214 front connector |
| Voltage Range | Up to 10 VDC |
| Environmental Conditions | 23°C ±5°C; RH < 80% |
| Compatibility | For NI 9214 module |
| Secure Mounting | Dual jackscrews |
National Instruments CAL-9214 Frequently Asked Questions
Question: What is the role of the CAL-9214 in the PXIe-9214?
Answer: The CAL-9214 Calibration Terminal Block streamlines the calibration of the NI-9214 module.
Question: Does the CAL-9214 work with other NI modules?
Answer: No, the CAL-9214 is built specifically for the NI 9214.
Question: What calibrators is the CAL-9214 compatible?
Answer: The CAL-9214 is compatible with Fluke 5520A and 5522A calibrators.
CAL-9214 PDF Manuals & Diagrams
CAL-9214 PDF Manuals
CAL-9214 DECLARATION OF CONFORMITY.PDF
NI 9214 CALIBRATION PROCEDURE.PDF
Why Buy From Apex Waves
"The business transaction was super easy and friendly."
"Hand carrying parts to fedex directly to make sure I get them overnight. Great service"
"They were very helpful to get me the test equipment that I need."
| Delivery: | UPS, FedEX and DHL – Free FedEx Ground on all orders Overnight, Next Day Air or Expedited shipping options available International delivery available Same day shipping for in-stock on location |
| Warranty: |
All of our products are covered by our Apex Waves Warranty. ✓ 3 Year Warranty - New Surplus Parts ✓ 2 Year Warranty - Refurbished Parts |
| Returns: | No hassle return policy. Dedicated customer service team. |
| Payment: |
|
| Quick Quotes: | Receive Price & Availability Today! |
| Calibration: | Ask About Our Tiered Calibration Levels |
| Option & Modules: | Confirm Your Requirements or Versions |
| Repair: | Cost & Lead Time Available Upon Request for Service Repair Evaluation: $150 |
| Share this page: |
|
